You are Here > Product Range > Window patching > High performance window patcher > Format range / Additional Equipment / Additional Functions

Format range

Basic Window Patcher WP 1100 / 1400 master

	WP 1100 master		WP 1400 master
Format range	Single lane operation	Double lane operation	Single lane operation	Double lane operation
	Blank length: 100 - 1180 mm Option: 100 - 1260 mm	Blank length 100 - 1180 mm Option: 100 - 1260 mm	Blank length: 100 - 1180 mm Option: 100 - 1260 mm	Blank length: 100 - 1180 mm Option: 100 - 1260 mm
	Blank width 80 - 1100 mm	Blank width 80 - 520 m	Blank width 80 - 1400 mm	Blank width 80 - 670 m
	Window/liner length: 55 - 720 mm Option: 55 - 900 mm	Window/liner length: 55 - 720 mm Option: 55 - 900 mm	Window/liner length: 55 - 720 mm Option: 55 - 900 mm	Window/liner length: 55 - 720 mm Option: 55 - 900 mm
	Window/liner width 30 - 940 mm	Window/line width 30 - 440 mm (depending on position of window)	Window/liner width 30 - 1240 mm	Window/line width 30 - 590 mm (depending on position of window)

Carton weight
Carton board	220 g/m2 - 800 g/m2
Corrugated	Up to 5 mm thickness

Film thickness (depending on cutting width)
PVC, PE, PS, etc.	0.03 - 0.35 mm
PET, PP pre-stretched	0.02 - 0.25 mm
Outer diameter	Max. 500 mm
Inner diameter	76 mm

Different dimensions on request.

You are Here > Product Range > Window patching > High performance window patcher > Format range / Additional Equipment / Additional Functions Window Patcher Additional equipment
	Stencil preparation table

Electronic production counter with marking device

Upper vacuum belt delivery handling special blank sizes and shapes

Missing window detector with marking device

Station for electrostatic discharge of film

Heiber + Schröder floor standing unwind for film rolls with large diameter

Unwind with film tension control system and expansions shafts

Unwind system for narrow films

Double sheet control

Automatic film roll splicing device
Principally this device can be mounted or retrofitted to each window patching machine series WP. ( It cannot be mounted simultaneously with the hot creasing and cutting station). Up to 4 devices can be fitted to a basic machine.

Ejector

You are Here > Product Range > Window patching > High performance window patcher > Additional equipment Window Patcher Additional Equipment
	Stencil preparation table

electronic production counter for window patcher

Electronic production counter with marking device

Upper vacuum belt delivery handling special blank sizes and shapes

missing window detector for high performance window patcher

Missing window detector with marking device

electrostatic discharge in window patcher

Station for electrostatic discharge of film

Automatic central lubrication system

large diameter film roll for window patcher

Heiber + Schröder floor standing unwind for film rolls with large diameter

Unwind with film tension control system and expansions shafts

Unwind system for narrow films

Double sheet control

Automatic film roll splicing device
Principally this device can be mounted or retrofitted to each window patcher series WP. ( It cannot be mounted simultaneously with the hot creasing and cutting station). Up to 4 devices can be fitted to a basic machine.

Ejector

Turner

You are Here > Product Range > Window patching > High performance window patcher > Additional functions

Window Patcher Additional functions


Window with straight line perforation or crease line. The perforation should weaken the film to achieve proper folding. Creasing only works for thin films up to max. 80 micro mm. Notice: as when folding the carton the window starts to wrinkle in the area next to the crease lines of the carton blank. To avoid this efect refer further down to windows with notches.


Window with intermittent slit. Commonly found in the tissue paper market.


Window with shaped perforation. Commonly found in the tissue paper market. Film material normally is PE or some times paper.


Window from pre-printed film. Any pre-printed web material - film can be applied, cut under register control.


Bag in box. Made from ready cross sealed tube material.


Window with crease lines and notches. The crease lines are executed by hot creasing device. The notches are produced by a male-female punching system.


Window with crease lines, notches and embossed recycling sign. The crease lines are executed by hot creasing device. The notches are produced by a male-female punching system.


Bag in box. Inner tube is made from web fed material. Length sealing is part of the process. Top and bottom stay open.


Carton blank with carrier handle. All common handles (Persson, Wilton) can be operated.


Carton blanks with various flexible fitments. A range of special feeders provide application of a variety of fitments like advertising cards, collars, spouts, etc.


Pre-cut and creased windows. This process allows the application of a large variety of shaped windows or other thin fitments made from board, paper or composite material.


Carton blanks with flip top collar.


Bag in box. Made from tube material. Cross sealing is part of the process


Tear strip


RKS

Heiber + Schröder USA, 600 Industrial Drive, Unit C, Cary, IL 60013
Phone: +1 (847) 639-8443 - Fax +1 (847) 639-8434 email: info@us-hs.com. Sitemap

Basic Window Patcher WP 1100 / 1400 master

Window Patcher Additional equipment

Window Patcher Additional Equipment

Window Patcher Additional functions